{"id":556,"date":"2026-04-21T08:50:50","date_gmt":"2026-04-21T08:50:50","guid":{"rendered":"https:\/\/ndtaura.fi\/?page_id=556"},"modified":"2026-09-08T08:25:44","modified_gmt":"2026-09-08T08:25:44","slug":"penetrant-testing","status":"publish","type":"page","link":"https:\/\/ndtaura.fi\/en\/tunkeumanestetarkastus\/","title":{"rendered":"Penetrant testing"},"content":{"rendered":"
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Penetrant testing<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

(PT)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

A welding crack, fatigue crack or other manufacturing defect can remain hidden from the naked eye \u2014 until it causes serious damage. Liquid penetrant testing (PT) reveals defects that extend to the surface
quickly, without radiation and on all non-porous materials, including austenitic stainless steel and aluminium.\u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tSFS-EN ISO 9712 certified<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tFrom pre-processing to audit-ready inspection report<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tRapid reporting, even in under 24 hours<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t\t
    \n\t\t
    \n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    METHOD<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    PRINCIPLE<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Dye penetrant inspection is based on capillary action: the penetrant, which has a low surface tension, is drawn into cracks and other discontinuities open to the surface of a clean and dry component being inspected. The penetrant is allowed to dwell for a sufficient penetration time
    \u2014 usually 5\u201330 minutes depending on the type of defect and the material. Excess penetrant is removed in a controlled manner, after which a developer is applied to the surface.<\/p>

    The developer sucks up the remaining liquid from surface discontinuities of the penetration and makes the indications visible to the naked eye or under UV light. The fluorescent wet method achieves the highest sensitivity even for micrometer-scale cracking defects.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Note<\/strong>
    PT is suitable for all non-porous materials regardless
    about their magnetic properties.<\/p>

    It is the primary surface method for austenitic
    for stainless steel and aluminium, for which MT is not suitable.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

    \n\t\t
    \n\t\t
    \n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    SUITABILITY<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    SUITABLE MATERIALS AND STRUCTURES<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tCarbon steel and alloy steels<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tAustenitic and ferritic stainless steel<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tAluminium and aluminium alloys<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tTitanium, nickel and other non-ferromagnetic metal alloys<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tPlastics and composites (non-porous)<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tCeramics and glass materials<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
    • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tCastings, forgings and welded joints<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
      \n\t\t\t\t\t
      \n\t\t
      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      FASTEST REPORTING IN THE INDUSTRY<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Our AI-assisted reporting system enables a completed inspection report in even less than
      in 24 hours \u2014 even for rush orders.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      FLEXIBLE IMPLEMENTATION<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Inspections are carried out at night and at weekends if necessary. On-site at short notice
      \u2014 when the production schedule cannot be stretched.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Broadest material coverage<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      PT is the only surface testing method that is equally suitable for ferromagnetic and non-
      for ferromagnetic materials \u2014 one method covers the entire production line.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t\t
      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      AUDIT PROCESS STEP BY STEP<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tSurface pretreatment and cleaning\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

      \n\t\t\t\t\t\tThe surface to be inspected shall be cleaned of oil, grease, paint and loose matter in accordance with standard EN ISO 3452-2. Every surface-breaking discontinuity must be free from contamination prior to the application of the penetrant.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tAPPLICATION AND PENETRATION TIME OF THE LOCAL ANAESTHETIC\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

      \n\t\t\t\t\t\tThe penetrant is applied to the surface to be inspected by spraying, brushing, or dipping. The penetration time is usually 5\u201330 minutes. The method to be used\u2014visible colour or fluorescent\u2014is selected according to the object and requirements.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tREMOVAL OF EXCESS PENETRANT\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

      \n\t\t\t\t\t\tExcess penetrant is removed from the surface in a controlled manner either by water washing, solvent removal or after emulsification. Removal is always done in one direction, and the solvent must not be sprayed directly onto the surface.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tDEVELOPMENT OF HINTS AND INDICATION FORMATION\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

      \n\t\t\t\t\t\tThe developer is applied evenly over the entire inspection area. The developer draws the remaining penetrant from the discontinuities to the surface, forming a visible indication. The development time is 10 to 30 minutes.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t
      \n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/span>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
      \n\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tINSPECTION, ASSESSMENT AND REPORTING\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

      \n\t\t\t\t\t\tA Level II or III certified inspector assesses indications in visible light or UV light. Our AI-assisted reporting system delivers the completed inspection report in under 24 hours \u2014 ready to be attached to the QA\/QC documentation.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      TYPICAL APPLICATIONS<\/strong><\/h4>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n 01<\/span>\n

      Welds in piping and prefabricated piping \u2014 in particular austenitic stainless steel and aluminium prior to installation<\/p>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      02<\/span><\/p>

      Pressure equipment welds and tank structures where non-ferromagnetic material prevents the use of MT (PED 2014\/68\/EU)<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      03<\/span><\/p>

      Structures in the shipyard and shipbuilding industries: aluminium hulls, titanium components and stainless steel<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      04<\/span><\/p>

      Components for the aircraft industry and other high-safety-class parts<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      05<\/span><\/p>

      Quality assurance of surface defects in castings and forgings prior to machining or commissioning<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      06<\/span><\/p>

      In-service inspections: identification of fatigue cracks and corrosion damage in equipment in service<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t\t
      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      ALONGSIDE PT AND MUIDEN NDT METHODS<\/strong><\/h3>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      The following comparison helps to select the most suitable method or combination of methods for the situation:<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\r\n\r\n\r\n\r\n\r\nNDT method comparison<\/title>\r\n<style>\r\n * { box-sizing: border-box; margin: 0; padding: 0; }\r\n\r\n body {\r\n background: #111;\r\n font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', sans-serif;\r\n -webkit-font-smoothing: antialiased;\r\n padding: 2rem 1rem;\r\n }\r\n\r\n .ndt-wrap { max-width: 960px; margin: 0 auto; }\r\n\r\n \/* \u2500\u2500 DESKTOP TABLE \u2500\u2500 *\/\r\n table.ndt {\r\n width: 100%;\r\n border-collapse: collapse;\r\n font-size: 14px;\r\n }\r\n\r\n table.ndt th,\r\n table.ndt td {\r\n padding: 14px 18px;\r\n border-bottom: 1px solid rgba(255,255,255,0.07);\r\n vertical-align: middle;\r\n }\r\n\r\n \/* Header row *\/\r\n table.ndt thead tr {\r\n background: #00e5cc;\r\n }\r\n\r\n table.ndt th {\r\n color: #111;\r\n font-size: 12px;\r\n font-weight: 700;\r\n letter-spacing: 0.08em;\r\n text-transform: uppercase;\r\n text-align: center;\r\n }\r\n\r\n table.ndt th.feature-col {\r\n text-align: left;\r\n background: #1e1e1e;\r\n color: #aaa;\r\n font-size: 11px;\r\n letter-spacing: 0.1em;\r\n }\r\n\r\n \/* Body rows *\/\r\n table.ndt tbody tr { background: #1a1a1a; }\r\n table.ndt tbody tr:nth-child(even) { background: #1e1e1e; }\r\n table.ndt tbody tr:hover td { background: #242424; }\r\n\r\n table.ndt td {\r\n color: #fff;\r\n text-align: center;\r\n font-size: 13px;\r\n }\r\n\r\n table.ndt td.feature-col {\r\n text-align: left;\r\n font-size: 11px;\r\n font-weight: 700;\r\n letter-spacing: 0.08em;\r\n text-transform: uppercase;\r\n color: #ccc;\r\n background: #1a1a1a;\r\n min-width: 160px;\r\n }\r\n\r\n \/* Badges *\/\r\n .val { display: inline-flex; align-items: center; gap: 5px; font-weight: 600; }\r\n .val-yes { color: #00e5cc; }\r\n .val-no { color: #ff5a5a; }\r\n .val-mid { color: #aaa; }\r\n .val-ok { color: #7dd87d; }\r\n\r\n .icon { font-style: normal; font-size: 13px; }\r\n\r\n \/* \u2500\u2500 MOBILE CARDS \u2500\u2500 *\/\r\n .mobile-cards { display: none; }\r\n\r\n .m-method {\r\n background: #1a1a1a;\r\n border-radius: 10px;\r\n overflow: hidden;\r\n margin-bottom: 1rem;\r\n border: 1px solid rgba(255,255,255,0.08);\r\n }\r\n\r\n .m-method-header {\r\n background: #00e5cc;\r\n padding: 12px 16px;\r\n }\r\n\r\n .m-method-header h3 {\r\n font-size: 15px;\r\n font-weight: 700;\r\n color: #111;\r\n letter-spacing: 0.06em;\r\n text-transform: uppercase;\r\n margin: 0;\r\n }\r\n\r\n .m-row {\r\n display: flex;\r\n justify-content: space-between;\r\n align-items: center;\r\n padding: 11px 16px;\r\n border-bottom: 1px solid rgba(255,255,255,0.06);\r\n gap: 12px;\r\n }\r\n\r\n .m-row:last-child { border-bottom: none; }\r\n\r\n .m-label {\r\n font-size: 11px;\r\n font-weight: 700;\r\n letter-spacing: 0.07em;\r\n text-transform: uppercase;\r\n color: #888;\r\n flex: 1;\r\n }\r\n\r\n .m-val {\r\n font-size: 12px;\r\n font-weight: 600;\r\n text-align: right;\r\n flex-shrink: 0;\r\n }\r\n\r\n @media (max-width: 680px) {\r\n table.ndt { display: none; }\r\n .mobile-cards { display: block; }\r\n body { padding: 1.5rem 0.75rem; }\r\n }\r\n<\/style>\r\n<\/head>\r\n<body>\r\n\r\n<div class=\"ndt-wrap\">\r\n\r\n <!-- DESKTOP TABLE -->\r\n <table class=\"ndt\">\r\n <thead>\r\n <tr>\r\n <th class=\"feature-col\">Feature<\/th>\r\n <th>PT<\/th>\r\n <th>MT<\/th>\r\n <th>DRT<\/th>\r\n <th>UT \/ PAUT<\/th>\r\n <\/tr>\r\n <\/thead>\r\n <tbody>\r\n <tr>\r\n <td class=\"feature-col\">Pintaviat<\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Excellent<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Excellent<\/span><\/td>\r\n <td><span class=\"val val-mid\">Limited<\/span><\/td>\r\n <td><span class=\"val val-mid\">Limited<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Subsurface defects (\u22643 mm)<\/td>\r\n <td><span class=\"val val-no\"><i class=\"icon\">\u2717<\/i> Not suitable<\/span><\/td>\r\n <td><span class=\"val val-ok\"><i class=\"icon\">\u2713<\/i> Good<\/span><\/td>\r\n <td><span class=\"val val-mid\">Limited<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Excellent<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Internal volumetric defects<\/td>\r\n <td><span class=\"val val-no\"><i class=\"icon\">\u2717<\/i> Not suitable<\/span><\/td>\r\n <td><span class=\"val val-no\"><i class=\"icon\">\u2717<\/i> Not suitable<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Excellent<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Excellent<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Non-ferromagnetic materials<\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Suitable<\/span><\/td>\r\n <td><span class=\"val val-no\"><i class=\"icon\">\u2717<\/i> Not suitable<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Suitable<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Suitable<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Freedom from radiation<\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Yes<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Yes<\/span><\/td>\r\n <td><span class=\"val val-no\"><i class=\"icon\">\u2717<\/i> It requires radiation protection<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Yes<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Pace on the pitch<\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Fast<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Fast<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Fast<\/span><\/td>\r\n <td><span class=\"val val-mid\">Moderate<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Material coverage<\/td>\r\n <td><span class=\"val val-ok\"><i class=\"icon\">\u2713<\/i> All non-porous<\/span><\/td>\r\n <td><span class=\"val val-no\">Only ferromagnetic<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> All metals<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> All metals<\/span><\/td>\r\n <\/tr>\r\n <tr>\r\n <td class=\"feature-col\">Hardware investment<\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Matala<\/span><\/td>\r\n <td><span class=\"val val-yes\"><i class=\"icon\">\u2713<\/i> Matala<\/span><\/td>\r\n <td><span class=\"val val-no\">High<\/span><\/td>\r\n <td><span class=\"val val-mid\">Moderate<\/span><\/td>\r\n <\/tr>\r\n <\/tbody>\r\n <\/table>\r\n\r\n <!-- MOBILE CARDS -->\r\n <div class=\"mobile-cards\">\r\n\r\n <div class=\"m-method\">\r\n <div class=\"m-method-header\"><h3>Turku University Neuropsychological Rehabilitation Test<\/h3><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pintaviat<\/span><span class=\"m-val val-yes\">\u2713 Excellent<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Sub-surface defects (\u22643 mm)<\/span><span class=\"m-val val-no\">\u2717 Not suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Internal volumetric defects<\/span><span class=\"m-val val-no\">\u2717 Not suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Non-ferromagnetic materials<\/span><span class=\"m-val val-yes\">\u2713 Suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Freedom from radiation<\/span><span class=\"m-val val-yes\">\u2713 Yes<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pace on the pitch<\/span><span class=\"m-val val-yes\">\u2713 Quick<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Material coverage<\/span><span class=\"m-val val-ok\">\u2713 All non-porous<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Hardware investment<\/span><span class=\"m-val val-yes\">\u2713 Matala<\/span><\/div>\r\n <\/div>\r\n\r\n <div class=\"m-method\">\r\n <div class=\"m-method-header\"><h3>Magnetic particle testing<\/h3><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pintaviat<\/span><span class=\"m-val val-yes\">\u2713 Excellent<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Sub-surface defects (\u22643 mm)<\/span><span class=\"m-val val-ok\">\u2713 Good<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Internal volumetric defects<\/span><span class=\"m-val val-no\">\u2717 Not suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Non-ferromagnetic materials<\/span><span class=\"m-val val-no\">\u2717 Not suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Freedom from radiation<\/span><span class=\"m-val val-yes\">\u2713 Yes<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pace on the pitch<\/span><span class=\"m-val val-yes\">\u2713 Quick<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Material coverage<\/span><span class=\"m-val val-no\">Only ferromagnetic<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Hardware investment<\/span><span class=\"m-val val-yes\">\u2713 Matala<\/span><\/div>\r\n <\/div>\r\n\r\n <div class=\"m-method\">\r\n <div class=\"m-method-header\"><h3>DRT \u2014 Digital X-ray<\/h3><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pintaviat<\/span><span class=\"m-val val-mid\">Limited<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Sub-surface defects (\u22643 mm)<\/span><span class=\"m-val val-mid\">Limited<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Internal volumetric defects<\/span><span class=\"m-val val-yes\">\u2713 Excellent<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Non-ferromagnetic materials<\/span><span class=\"m-val val-yes\">\u2713 Suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Freedom from radiation<\/span><span class=\"m-val val-no\">\u2717 Requires radiation shielding<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pace on the pitch<\/span><span class=\"m-val val-yes\">\u2713 Quick<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Material coverage<\/span><span class=\"m-val val-yes\">\u2713 All metals<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Hardware investment<\/span><span class=\"m-val val-no\">High<\/span><\/div>\r\n <\/div>\r\n\r\n <div class=\"m-method\">\r\n <div class=\"m-method-header\"><h3>UT \/ PAUT \u2014 Ultrasonic Testing<\/h3><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pintaviat<\/span><span class=\"m-val val-mid\">Limited<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Sub-surface defects (\u22643 mm)<\/span><span class=\"m-val val-yes\">\u2713 Excellent<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Internal volumetric defects<\/span><span class=\"m-val val-yes\">\u2713 Excellent<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Non-ferromagnetic materials<\/span><span class=\"m-val val-yes\">\u2713 Suitable<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Freedom from radiation<\/span><span class=\"m-val val-yes\">\u2713 Yes<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Pace on the pitch<\/span><span class=\"m-val val-mid\">Moderate<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Material coverage<\/span><span class=\"m-val val-yes\">\u2713 All metals<\/span><\/div>\r\n <div class=\"m-row\"><span class=\"m-label\">Hardware investment<\/span><span class=\"m-val val-mid\">Moderate<\/span><\/div>\r\n <\/div>\r\n\r\n <\/div><!-- \/mobile-cards -->\r\n\r\n<\/div><!-- \/ndt-wrap -->\r\n<\/body>\r\n<\/html>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3ac142bd e-flex e-con-boxed e-con e-parent\" data-id=\"3ac142bd\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{"background_background":"classic"}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-6aa3d246 e-con-full e-flex e-con e-child\" data-id=\"6aa3d246\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-6781a5b9 elementor-widget elementor-widget-text-editor\" data-id=\"6781a5b9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h4><strong>Customer benefits<\/strong><\/h4>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3c72af29 e-con-full e-grid e-con e-child\" data-id=\"3c72af29\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ce165c5 elementor-widget elementor-widget-text-editor\" data-id=\"ce165c5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>Widest material coverage<\/h4><p>PT is suitable for all non-porous materials \u2014 metals, plastics, ceramics. It is particularly valuable for austenitic stainless steel and aluminium, for which MT is not suitable.\u00a0<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6d2eed0 elementor-widget elementor-widget-text-editor\" data-id=\"6d2eed0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>Speed and flexibility<\/h4><p>A field-deployable method without heavy equipment or radiation-shielded areas.<br \/>Reporting in even less than 24 hours. Inspector on-site at short notice.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-60b81a1 elementor-widget elementor-widget-text-editor\" data-id=\"60b81a1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>Safety and compliance<\/h4><p>Detect surface-breaking cracks prior to commissioning. Reporting complies with<br \/>EN ISO 3452-1, SFS-EN ISO 9712 and project-specific requirements.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-68f48e9 elementor-widget elementor-widget-text-editor\" data-id=\"68f48e9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>Cost-effectiveness<\/h4><p>Low hardware cost and quick field deployment. Prevents<br \/>identifying faults through repair welding, warranty claims and production downtime<br \/>in the preparation phase.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1562e4b elementor-widget elementor-widget-text-editor\" data-id=\"1562e4b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>HSE \u2014 safe to execute<\/h4><p>CT does not contain ionising radiation and does not require protected areas or evacuation.<br \/>Suitable to be carried out alongside production without significant HSE arrangements.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e010921 elementor-widget elementor-widget-text-editor\" data-id=\"e010921\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"ben-card\"><h4>Lifecycle management<\/h4><p>Regular PT inspection identifies fatigue cracks and corrosion damage<br \/>at an early stage. Supports predictive maintenance throughout the lifecycle<br \/>Agent.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e8307e6 e-flex e-con-boxed e-con e-parent\" data-id=\"e8307e6\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{"background_background":"classic"}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-bf46c8b e-con-full e-flex e-con e-child\" data-id=\"bf46c8b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-7e2098b e-con-full e-flex e-con e-child\" data-id=\"7e2098b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c213c00 elementor-widget elementor-widget-text-editor\" data-id=\"c213c00\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><strong>QUALIFICATION<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6b445eb elementor-widget elementor-widget-heading\" data-id=\"6b445eb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">STANDARDS AND CERTIFICATION<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6477fe6 elementor-widget elementor-widget-text-editor\" data-id=\"6477fe6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>NDT Aura Oy's inspectors operate in accordance with the standards listed below \u2014 a technically competent and legally acceptable inspection result.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-613541f elementor-widget elementor-widget-html\" data-id=\"613541f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"std-list\">\r\n\r\n <div class=\"std-row\">\r\n <span class=\"badge\">ISO 9712<\/span>\r\n <span class=\"desc\">SFS-EN ISO 9712 \u2014 Qualification and certification of NDT personnel<\/span>\r\n <\/div>\r\n\r\n <div class=\"std-row\">\r\n <span class=\"badge\">ISO 3452-1<\/span>\r\n <span class=\"desc\">EN ISO 3452-1 \u2014 Non-destructive testing: penetrant testing, general principles<\/span>\r\n <\/div>\r\n\r\n <div class=\"std-row\">\r\n <span class=\"badge\">ISO 3452-2<\/span>\r\n <span class=\"desc\">EN ISO 3452-2 \u2014 Testing of penetrant testing materials<\/span>\r\n <\/div>\r\n\r\n <div class=\"std-row\">\r\n <span class=\"badge\">EN ISO 23277<\/span>\r\n <span class=\"desc\">EN ISO 23277 \u2014 Acceptance levels for PT indications in welded joints<\/span>\r\n <\/div>\r\n\r\n <div class=\"std-row\">\r\n <span class=\"badge\">Project-specific<\/span>\r\n <span class=\"desc\">Project-specific EN, ISO, ASME and client requirements<\/span>\r\n <\/div>\r\n\r\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-bb90c18 e-con-full e-flex e-con e-child\" data-id=\"bb90c18\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-99fb05a e-con-full e-flex e-con e-child\" data-id=\"99fb05a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-c587efd e-con-full e-flex e-con e-child\" data-id=\"c587efd\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-26bc941 elementor-widget elementor-widget-text-editor\" data-id=\"26bc941\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><strong>NDT programme<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9c0b8a9 elementor-widget elementor-widget-heading\" data-id=\"9c0b8a9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">TOWARDS A COMPREHENSIVE NDT PROGRAMME<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-98e726a e-con-full e-flex e-con e-child\" data-id=\"98e726a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0bba621 elementor-widget elementor-widget-text-editor\" data-id=\"0bba621\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>PT detects surface flaws in all non-porous materials, but comprehensive quality assurance often requires a combination of methods. NDT Aura Oy consults on creating the most suitable inspection programme based on the target's risk level and standard requirements:<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-db2e57a elementor-widget elementor-widget-html\" data-id=\"db2e57a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"tag-grid\">\r\n <span class=\"tag active\">PT \u2013 PAINTING (ALL MAT.)<\/span>\r\n <span class=\"tag\">MT \u2013 SURFACE FINISH (IRON)<\/span>\r\n <span class=\"tag\">DRT \u2013 VOLUME FAULTS<\/span>\r\n <span class=\"tag\">UT\/PAUT \u2013 DEEP DEFECTS<\/span>\r\n <span class=\"tag\">X-ray<\/span>\r\n <span class=\"tag\">VT \u2013 VISUAL<\/span>\r\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-0df4324 e-flex e-con-boxed e-con e-parent\" data-id=\"0df4324\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{"background_background":"classic"}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b0f0309 elementor-widget elementor-widget-text-editor\" data-id=\"b0f0309\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h4>FREQUENTLY ASKED QUESTIONS (FAQ)<\/h4>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-afc2b1c e-con-full e-flex e-con e-child\" data-id=\"afc2b1c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c45302e elementor-widget elementor-widget-ucaddon_uc_icon_accordion\" data-id=\"c45302e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"ucaddon_uc_icon_accordion.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n<!-- start Icon Accordion -->\n\t\t<link id='font-awesome-css' href='https:\/\/ndtaura.fi\/wp-content\/plugins\/unlimited-elements-for-elementor\/assets_libraries\/font-awesome6\/fontawesome-all.min.css' type='text\/css' rel='stylesheet' >\n\t\t<link id='font-awesome-4-shim-css' href='https:\/\/ndtaura.fi\/wp-content\/plugins\/unlimited-elements-for-elementor\/assets_libraries\/font-awesome6\/fontawesome-v4-shims.min.css' type='text\/css' rel='stylesheet' >\n\n<style>\/* widget: Icon Accordion *\/\n\n#uc_uc_icon_accordion_elementor_c45302e *{\n\tbox-sizing: border-box;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_container .uc-heading{\n\tcursor:pointer;\n display:flex;\n align-items:center;\n transition:0.3s;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_container .uc-heading span.bbb{\n\tdisplay:block;\t \n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_ac_box.uc-item-active span.uc_dactive{\n\tdisplay:none;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_ac_box:not(.uc-item-active) span.uc_active{\n\tdisplay:none;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_icon_holder,\n#uc_uc_icon_accordion_elementor_c45302e .ue_icon_spacing{\n flex-grow:0;\n flex-shrink:0; \n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_content{\n\tdisplay: none;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_icon{\n display:flex;\n justify-content:center;\n align-items:center;\n line-height:1em;\n transition:0.3s;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_icon svg{\n height:1em;\n width:1em;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_expand_inside{\n display:flex;\n justify-content:center;\n align-items:center;\n line-height:1em;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_expand_inside svg{\n height:1em;\n width:1em;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_expand,\n#uc_uc_icon_accordion_elementor_c45302e .ue_expand_spacing{\n flex-grow:0;\n flex-shrink:0;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .ue_title{\n flex-grow:1;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_ac_box:last-child{\n margin-bottom:0px;\n}\n\n#uc_uc_icon_accordion_elementor_c45302e .uc_ac_box{\n overflow:hidden;\n}\n\n<\/style>\n\n<div class=\"uc_material_accordion\" id=\"uc_uc_icon_accordion_elementor_c45302e\" data-name=\"\" data-closeothers=\"true\" data-scrolltohead=\"off\">\n <div class=\"uc_container uc-items-wrapper\">\n \n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item1\" class=\"uc_ac_box elementor-repeater-item-6ce792b\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item1-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item1-title\" class=\"ue_title\">What is the difference between dye penetrant testing (PT) and magnetic particle testing (MT)?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item1-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item1-title\" >\n <p>Both detect surface defects, but the material coverage differs significantly. MT requires<br \/>ferromagnetic material \u2014 it is not suitable for austenitic stainless steel,<br \/>for aluminium, titanium or plastic. PT is suitable for all non-porous materials<br \/>regardless of magnetic properties. <a href=\"https:\/\/ndtaura.fi\/en\/magnetic-particle-testing\/\">In ferromagnetic materials, magnetic particle testing (MT) provides<\/a><br \/>usually even higher sensitivity than PT also to subsurface defects.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item2\" class=\"uc_ac_box elementor-repeater-item-4c4596c\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item2-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item2-title\" class=\"ue_title\">Can PT detect internal flaws or volumetric defects?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item2-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item2-title\" >\n <p>No. PT is exclusively a surface method: it only detects flaws that reach or open to the surface. For detecting internal volumetric flaws, you need <a href=\"https:\/\/ndtaura.fi\/en\/ultrasonic-inspection\/\">ultrasonic testing (UT\/PAUT)<\/a> or radiographic testing (dRT or RT). For comprehensive quality assurance, a combination of PT and dRT is recommended for critical structures.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item3\" class=\"uc_ac_box elementor-repeater-item-a26a4b5\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item3-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item3-title\" class=\"ue_title\">How quickly will the report be available?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item3-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item3-title\" >\n <p>Our AI-assisted reporting system enables a completed inspection report even<br \/>within 24 hours of carrying out the inspection. In urgent situations, we are often able to deliver<br \/>I will report either on the same day or the following morning.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item4\" class=\"uc_ac_box elementor-repeater-item-42d79ca\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item4-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item4-title\" class=\"ue_title\">Is PT suitable for stainless steel and aluminium?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item4-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item4-title\" >\n <p>Yes \u2014 PT is precisely the primary surface method for these materials. Unlike MT,<br \/>magnetic particle inspection does not require a ferromagnetic material, so it is suitable<br \/>excellently also for austenitic stainless steel, aluminium, titanium and<br \/>for other non-ferromagnetic materials.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item5\" class=\"uc_ac_box elementor-repeater-item-1921544\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item5-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item5-title\" class=\"ue_title\">Does PT require special arrangements or a production shutdown?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item5-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item5-title\" >\n <p>PT is a radiation-free field-deployable method that requires neither a radiation-controlled area nor<br \/>evacuation of personnel. Inspections are carried out at night or at other quiet times if necessary<br \/>during production. An inspector can be arranged at 24 hours' notice.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n\n<div id=\"uc_uc_icon_accordion_elementor_c45302e_item6\" class=\"uc_ac_box elementor-repeater-item-a1f99ff\">\n <div class=\"uc-heading uc_trigger\" role=\"button\" aria-controls=\"uc_uc_icon_accordion_elementor_c45302e_item6-content\" tabindex=\"0\" aria-expanded=\"false\">\n \n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item6-title\" class=\"ue_title\">What information is needed for a request for quotation?<\/div> \n \n <div class=\"ue_expand_spacing\"><\/div>\n <div class=\"ue_expand\">\n <div class=\"ue_expand_inside\">\n <span class=\"uc_dactive bbb ue_accordion_icon\" ><i class='fas fa-plus'><\/i><\/span>\n <span class=\"uc_active bbb ue_accordion_icon\"><i class='fas fa-minus'><\/i><\/span>\n <\/div>\n <\/div>\n \n <\/div>\n \n <div id=\"uc_uc_icon_accordion_elementor_c45302e_item6-content\" class=\"uc_content\" role=\"region\" aria-labelledby=\"uc_uc_icon_accordion_elementor_c45302e_item6-title\" >\n <p>A rough description of the object is sufficient: material, welding method or manufacturing method,<br \/>area or weld volume to be inspected, applicable standard or project requirement, and the desired<br \/>schedule. Drawings and isometric views speed up the preparation of the quotation.<\/p>\n \n \n \n \n <\/div>\n<\/div>\n\n <\/div>\n<\/div>\n<!-- end Icon Accordion -->\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-188d7e10 e-flex e-con-boxed e-con e-parent\" data-id=\"188d7e10\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5bce9af7 elementor-widget elementor-widget-html\" data-id=\"5bce9af7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"html.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<!--\r\n NDT Aura \u2014 Tarjouspyynt\u00f6 CTA -elementti\r\n =========================================\r\n K\u00e4ytt\u00f6: Lis\u00e4\u00e4 Elementorissa \"HTML\"-widgettiin ennen footeria.\r\n Muokkaa tekstit ja linkit suoraan t\u00e4st\u00e4 koodista.\r\n\r\n MUOKATTAVAT KOHDAT on merkitty kommenteilla:\r\n <!-- MUOKKAA: ... -->\r\n-->\r\n\r\n<style>\r\n \/* \u2500\u2500 Elementti: tarjouspyynt\u00f6 CTA \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500 *\/\r\n .ndta-cta {\r\n background: #0a0a0a;\r\n padding: 3.5rem 2.5rem;\r\n font-family: 'Helvetica Neue', Arial, sans-serif;\r\n }\r\n\r\n .ndta-cta__inner {\r\n max-width: 900px;\r\n margin: 0 auto;\r\n }\r\n\r\n \/* Yl\u00e4kyltti *\/\r\n .ndta-cta__eyebrow {\r\n display: flex;\r\n align-items: center;\r\n gap: 10px;\r\n font-size: 11px;\r\n font-weight: 600;\r\n letter-spacing: 0.13em;\r\n text-transform: uppercase;\r\n color: #00e5cc; \/* \u2190 MUOKKAA: aksenttiv\u00e4ri *\/\r\n margin-bottom: 1rem;\r\n }\r\n\r\n .ndta-cta__eyebrow::before {\r\n content: '';\r\n display: block;\r\n width: 28px;\r\n height: 2px;\r\n background: #00e5cc; \/* \u2190 MUOKKAA: sama kuin eyebrow-v\u00e4ri *\/\r\n }\r\n\r\n \/* Otsikko *\/\r\n .ndta-cta__heading {\r\n font-size: 18px;\r\n font-weight: 800;\r\n color: #ffffff;\r\n line-height: 1.15;\r\n margin: 0 0 0.5rem;\r\n letter-spacing: -0.01em;\r\n }\r\n\r\n \/* Alaotsikko *\/\r\n .ndta-cta__sub {\r\n font-size: 14px;\r\n font-weight: 500;\r\n color: #00e5cc; \/* \u2190 MUOKKAA: aksenttiv\u00e4ri *\/\r\n margin: 0 0 1.5rem;\r\n letter-spacing: 0.02em;\r\n }\r\n\r\n \/* Ingressiteksti *\/\r\n .ndta-cta__body {\r\n font-size: 14px;\r\n color: #999999;\r\n line-height: 1.8;\r\n max-width: 620px;\r\n margin: 0 0 2rem;\r\n }\r\n\r\n \/* Kolme infoboksia *\/\r\n .ndta-cta__grid {\r\n display: grid;\r\n grid-template-columns: repeat(3, 1fr);\r\n gap: 1px;\r\n background: #222;\r\n border: 1px solid #222;\r\n margin-bottom: 2.25rem;\r\n }\r\n\r\n @media (max-width: 640px) {\r\n .ndta-cta__grid {\r\n grid-template-columns: 1fr;\r\n }\r\n }\r\n\r\n .ndta-cta__grid-item {\r\n background: #111;\r\n padding: 1.1rem 1.25rem;\r\n display: flex;\r\n align-items: flex-start;\r\n gap: 12px;\r\n }\r\n\r\n .ndta-cta__grid-item svg {\r\n flex-shrink: 0;\r\n width: 18px;\r\n height: 18px;\r\n stroke: #00e5cc; \/* \u2190 MUOKKAA: ikonin v\u00e4ri *\/\r\n stroke-width: 1.8;\r\n fill: none;\r\n margin-top: 2px;\r\n }\r\n\r\n .ndta-cta__grid-item span {\r\n font-size: 13px;\r\n color: #c0c0c0;\r\n line-height: 1.55;\r\n }\r\n\r\n \/* Toimintorivi *\/\r\n .ndta-cta__actions {\r\n display: flex;\r\n align-items: center;\r\n gap: 1.5rem;\r\n flex-wrap: wrap;\r\n margin-bottom: 2rem;\r\n }\r\n\r\n \/* P\u00e4\u00e4nappi *\/\r\n .ndta-cta__btn {\r\n display: inline-flex;\r\n align-items: center;\r\n gap: 9px;\r\n background: #00e5cc; \/* \u2190 MUOKKAA: napin taustav\u00e4ri *\/\r\n color: #000000; \/* \u2190 MUOKKAA: napin tekstiv\u00e4ri *\/\r\n text-decoration: none;\r\n font-size: 14px;\r\n font-weight: 700;\r\n letter-spacing: 0.04em;\r\n text-transform: uppercase;\r\n padding: 14px 32px;\r\n border-radius: 2px;\r\n transition: background 0.15s ease, transform 0.1s ease;\r\n }\r\n\r\n .ndta-cta__btn:hover {\r\n background: #00ccb5; \/* \u2190 MUOKKAA: hover-v\u00e4ri *\/\r\n transform: translateY(-1px);\r\n }\r\n\r\n .ndta-cta__btn svg {\r\n width: 16px;\r\n height: 16px;\r\n stroke: currentColor;\r\n stroke-width: 2;\r\n fill: none;\r\n }\r\n\r\n \/* Suora s\u00e4hk\u00f6postilinkki *\/\r\n .ndta-cta__sep {\r\n font-size: 12px;\r\n color: #444;\r\n }\r\n\r\n .ndta-cta__email {\r\n display: inline-flex;\r\n align-items: center;\r\n gap: 6px;\r\n font-size: 14px;\r\n color: #00e5cc; \/* \u2190 MUOKKAA: linkin v\u00e4ri *\/\r\n text-decoration: none;\r\n opacity: 0.75;\r\n transition: opacity 0.15s;\r\n }\r\n\r\n .ndta-cta__email:hover {\r\n opacity: 1;\r\n }\r\n\r\n .ndta-cta__email svg {\r\n width: 15px;\r\n height: 15px;\r\n stroke: currentColor;\r\n stroke-width: 1.8;\r\n fill: none;\r\n }\r\n\r\n \/* Alateksti *\/\r\n .ndta-cta__footer {\r\n padding-top: 1.5rem;\r\n border-top: 1px solid #1c1c1c;\r\n font-size: 12px;\r\n color: #555;\r\n display: flex;\r\n align-items: center;\r\n gap: 8px;\r\n }\r\n\r\n .ndta-cta__footer svg {\r\n width: 14px;\r\n height: 14px;\r\n stroke: #444;\r\n stroke-width: 1.8;\r\n fill: none;\r\n flex-shrink: 0;\r\n }\r\n\r\n .ndta-cta__footer a {\r\n color: #00e5cc; \/* \u2190 MUOKKAA: linkin v\u00e4ri *\/\r\n text-decoration: none;\r\n opacity: 0.8;\r\n }\r\n\r\n .ndta-cta__footer a:hover {\r\n opacity: 1;\r\n }\r\n \/* \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500 *\/\r\n<\/style>\r\n\r\n<section class=\"ndta-cta\" aria-label=\"Request for quotation for magnetic particle testing\">\r\n\r\n <div class=\"ndta-cta__inner\">\r\n\r\n <!-- MUOKKAA: Yl\u00e4kyltti -->\r\n <p class=\"ndta-cta__eyebrow\">Request for quotation<\/p>\r\n\r\n <!-- MUOKKAA: P\u00e4\u00e4otsikko -->\r\n <h2 class=\"ndta-cta__heading\">Request a quote for liquid penetrant testing<\/h2>\r\n\r\n <!-- MUOKKAA: Alaotsikko -->\r\n <p class=\"ndta-cta__sub\">\u2014 fast response, audit-ready documentation<\/p>\r\n\r\n <!-- MUOKKAA: Ingressiteksti -->\r\n <p class=\"ndta-cta__body\">\r\nTell us about the inspection object, material, applicable standard and schedule \u2014 we will respond to the request for quotation quickly. In urgent situations, call directly.\r\n <\/p>\r\n\r\n <!-- MUOKKAA: Kolme infoboksia \u2014 teksti <span>-tagin sis\u00e4ll\u00e4 -->\r\n <div class=\"ndta-cta__grid\">\r\n\r\n <div class=\"ndta-cta__grid-item\">\r\n <!-- Ikoni: komponentti\/rakenne -->\r\n <svg viewbox=\"0 0 24 24\" aria-hidden=\"true\"><rect x=\"2\" y=\"2\" width=\"9\" height=\"9\" rx=\"1\"\/><rect x=\"13\" y=\"2\" width=\"9\" height=\"9\" rx=\"1\"\/><rect x=\"2\" y=\"13\" width=\"9\" height=\"9\" rx=\"1\"\/><rect x=\"13\" y=\"13\" width=\"9\" height=\"9\" rx=\"1\"\/><\/svg>\r\n <!-- MUOKKAA: boksin teksti -->\r\n <span>Material and structure or weld to be inspected<\/span>\r\n <\/div>\r\n\r\n <div class=\"ndta-cta__grid-item\">\r\n <!-- Ikoni: sertifikaatti\/standardi -->\r\n <svg viewbox=\"0 0 24 24\" aria-hidden=\"true\"><circle cx=\"12\" cy=\"8\" r=\"5\"\/><path d=\"M8.21 13.89L7 23l5-3 5 3-1.21-9.12\"\/><\/svg>\r\n <!-- MUOKKAA: boksin teksti -->\r\n <span>Applicable standard or project-specific requirement<\/span>\r\n <\/div>\r\n\r\n <div class=\"ndta-cta__grid-item\">\r\n <!-- Ikoni: tiedosto\/piirustus -->\r\n <svg viewbox=\"0 0 24 24\" aria-hidden=\"true\"><path d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\/><polyline points=\"14 2 14 8 20 8\"\/><line x1=\"16\" y1=\"13\" x2=\"8\" y2=\"13\"\/><line x1=\"16\" y1=\"17\" x2=\"8\" y2=\"17\"\/><polyline points=\"10 9 9 9 8 9\"\/><\/svg>\r\n <!-- MUOKKAA: boksin teksti -->\r\n <span>Drawings or a short project description speed up the quotation<\/span>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <div class=\"ndta-cta__actions\">\r\n\r\n <!--\r\n MUOKKAA: Napin href-osoite.\r\n mailto-osoite avaa s\u00e4hk\u00f6postiohjelman valmiilla otsikolla ja rungolla.\r\n Vaihda \"tilaukset@ndtaura.fi\" tarvittaessa.\r\n -->\r\n <!-- MUOKKAA: napin linkki -->\r\n <a class=\"ndta-cta__btn\"\r\n href=\"https:\/\/ndtaura.fi\/en\/contact-details\/\">\r\n <!-- L\u00e4het\u00e4-ikoni -->\r\n <svg viewbox=\"0 0 24 24\" aria-hidden=\"true\"><line x1=\"22\" y1=\"2\" x2=\"11\" y2=\"13\"\/><polygon points=\"22 2 15 22 11 13 2 9 22 2\"\/><\/svg>\r\n <!-- MUOKKAA: napin teksti -->\r\n contact the regional manager\r\n <\/a>\r\n\r\n <span class=\"ndta-cta__sep\">or write directly<\/span>\r\n\r\n <!-- MUOKKAA: s\u00e4hk\u00f6postiosoite -->\r\n <a class=\"ndta-cta__email\" href=\"mailto:tilaukset@ndtaura.fi\">\r\n <svg viewbox=\"0 0 24 24\" aria-hidden=\"true\"><path d=\"M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z\"\/><polyline points=\"22,6 12,13 2,6\"\/><\/svg>\r\n tilaukset@ndtaura.fi\r\n <\/a>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n<\/section>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-68717289 e-flex e-con-boxed e-con e-parent\" data-id=\"68717289\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-6376c215 e-con-full e-flex e-con e-child\" data-id=\"6376c215\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-198585e9 elementor-widget elementor-widget-image\" data-id=\"198585e9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"66\" height=\"96\" src=\"https:\/\/ndtaura.fi\/wp-content\/uploads\/2026\/05\/logo1_3_Bureau_Veritas-muokattu.png\" class=\"attachment-large size-large wp-image-780\" alt=\"\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3513602c e-con-full e-flex e-con e-child\" data-id=\"3513602c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7bbad1d3 elementor-widget elementor-widget-image\" data-id=\"7bbad1d3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"80\" height=\"96\" src=\"https:\/\/ndtaura.fi\/wp-content\/uploads\/2026\/05\/logo1_2_LR_Approved-muokattu.png\" class=\"attachment-large size-large wp-image-779\" alt=\"Lloyd's Register (LR) - Approved Service Supplier - classification society approval\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-30c58365 e-con-full e-flex e-con e-child\" data-id=\"30c58365\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-35a7ab33 elementor-widget elementor-widget-image\" data-id=\"35a7ab33\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"77\" height=\"96\" src=\"https:\/\/ndtaura.fi\/wp-content\/uploads\/2026\/05\/logo2_1_Kiwa_ISO9001-muokattu.png\" class=\"attachment-large size-large wp-image-778\" alt=\"Kiwa ISO 9001 quality management system international standard certification\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-48defdf e-con-full e-flex e-con e-child\" data-id=\"48defdf\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-3e68e5b7 elementor-widget elementor-widget-image\" data-id=\"3e68e5b7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img loading=\"lazy\" decoding=\"async\" width=\"82\" height=\"96\" src=\"https:\/\/ndtaura.fi\/wp-content\/uploads\/2026\/05\/logo1_4_DNV-muokattu.png\" class=\"attachment-large size-large wp-image-777\" alt=\"Det Norske Veritas (DNV) International Classification - NDT Aura has passed the DNV audit\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Tunkeumanestetarkastus (PT) Hitsaushalkeama, v\u00e4symiss\u00e4r\u00f6 tai muu valmistusvirhe voi j\u00e4\u00e4d\u00e4 silm\u00e4lt\u00e4 piiloon \u2014 kunnes se aiheuttaa vakavan vaurion. Tunkeumanestetarkastus (PT) paljastaa pintaan ulottuvat viatnopeasti, ilman s\u00e4teily\u00e4 ja kaikissa ei-huokoisissa materiaaleissa, my\u00f6s austeniittisessa ruostumattomassa ter\u00e4ksess\u00e4 ja alumiinissa.\u00a0 SFS-EN ISO 9712 sertifioitu Esik\u00e4sittelyst\u00e4 auditointivalmiiseen tarkastusp\u00f6yt\u00e4kirjaan Nopea raportointi, jopa alle 24 tunnissa MENETELM\u00c4 TOIMINTAPERIAATE Tunkeumanestetarkastus perustuu kapillaari-ilmi\u00f6\u00f6n: matalaan pintaj\u00e4nnitteeseen […]<\/p>\n","protected":false},"author":8,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-556","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/pages\/556","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/comments?post=556"}],"version-history":[{"count":80,"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/pages\/556\/revisions"}],"predecessor-version":[{"id":1075,"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/pages\/556\/revisions\/1075"}],"wp:attachment":[{"href":"https:\/\/ndtaura.fi\/en\/wp-json\/wp\/v2\/media?parent=556"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}